This automatic reseating temperature and pressure relief valve has a 1 inch NPTF male inlet, 1 inch NPTF female outlet, 2 inch coated thermostat, pressure relief setpoint of 150 psi, and temperature relief setpoint of 210 degrees F. The valve can be installed directly in tank tappings for commercial applications to provide protection for hot water supply tanks and hot water heaters. It features a bronze body, tamper resistant bonnet screws, and test lever. Includes a nonrestrictive discharge drain line flood sensor with SentryPlus Alert® technology to detect excessive water discharges from the relief valve. Sensor activation requires purchase of an activation kit which can be connected to existing building management systems or the Watts Cellular Gateway.
Features a flood sensor with SentryPlus Alert technology to detect excessive water discharges from the relief valve | Requires purchase of activation kit to activate sensor | Bronze body | Tamper resistant bonnet screws | 2 Inch coated thermostat length | Non-mechanical seat to disc alignment | Set pressure 150 psi
Specification Sheet: https://productcatalog.sheret.com/DocServer/DSAnonDownloadServlet?action=download&type=product-artifacts&key=DS8f8620cc-b5a0-4ba6-ad4e-6457013716fb | Manufacturer Web Site: https://www.watts.ca | Installation Manual: https://productcatalog.sheret.com/DocServer/DSAnonDownloadServlet?action=download&type=product-artifacts&key=DSf062be9d-e214-4e38-a08e-b8bf901750e9 | Manufacturer Web Site: http://www.wattscanada.ca
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.