1-1/2 ABS BACKWATER VALVE
SKU: 7627070
Installed in a DWV piping drainage system to provide waste water backflow protection to fixtures and floor drains below the flood plane.
Service temperature rated at -40 degrees C (-40 F) to +80C (180F) | Normally used in the drainage portion of the DWV system only | hub connections can be single step ABS solvent cemented | Injection molded bodyin durable ABS plastic and using a reliable watertight o-ring | Can be buried up to 16" when used with a Canplas backwater valve sleeve Kit | Hand tighten lid plus a half turn provides a complete seal | Innovative test membrane from Canplas enables mess-free removal of the test membrane after a water test. | Hub connections can be single step ABS solvent cemented | Service temperature rated at -40 Degrees C (-40 F) to +80C (180F) | Injection molded body in durable ABS plastic and using a reliable watertight o-ring, | Simply remove the membrane with a knife after the system is fully drained
Specification Sheet: https://productcatalog.sheret.com/DocServer/DSAnonDownloadServlet?action=download&type=product-artifacts&key=DS10f8b56e-d0c0-4a7e-bc87-978795ef2832 | Manufacturer Web Site: https://canplas.com/ | Manufacturer Web Site: http://www.canplas.com
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.