RISER SET
SKU: 7629540
Injection molded, the Endura Extension Riser set is a one/two piece construction allowing the cover of the grease interceptor to be elevated from the tank; the extension providing a clean sleeve between the two. The extensions can be easily cut to height on site to provide 1" to 6" of height adjustment. Use a maximum of 3 extensions (18") per installation. Note: Use of riser extension DOES NOT increase the operating volume of the interceptor.
Typically up to three (3) sets of risers can be used perinstallation. | Each riser set provides 1.5” to 6” of he ight adjustment, be ing cut on site with a regular saw. | Injection molded in engineered thermoplastic, that will not corrode, chip or peel, even under the most severe applications | Maximum service temperature rated at (220F) +104C | Each riser set provides 1.5” to 6” of height adjustment, be ing cut on site with a regular saw. | Typically up to three (3) sets of risers can be used per installation.
Specification Sheet: https://productcatalog.sheret.com/DocServer/DSAnonDownloadServlet?action=download&type=product-artifacts&key=DS75f1d1de-033f-4c4a-87ea-4c8940d31fd9 | Manufacturer Web Site: https://canplas.com/product-category/endura/ | Manufacturer Web Site: http://www.canplas.com
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.