This 1/2 inch trap primer is installed in plumbing systems to prevent floor drain traps from losing their water seal by evaporation. It operates by sensing the pressure drop in the supply line from downstream fixtures or appliances. This trap primer features a lead free brass body with EDPM seals, built-in air gap, and 1/2 inch solder inlet and 1/2 inch female NPT outlet. The minimum supply pressure must exceed 25 psi (172 kPa) and the maximum supply pressure is 125 psi (8.6 bar).
Lead free brass construction | Built-in air gap | Prevents backflow of sewer gas into building | Tested and approved with ASSE standard 1018 and listed by IAPMO
Specification Sheet: https://productcatalog.sheret.com/DocServer/DSAnonDownloadServlet?action=download&type=product-artifacts&key=DS390a3226-686f-4188-9582-77b36264bc97 | Manufacturer Web Site: https://www.watts.ca | Installation Manual (French): https://productcatalog.sheret.com/DocServer/DSAnonDownloadServlet?action=download&type=product-artifacts&key=DS9e28d571-ce9b-4cfc-b8e7-6aabb296f219 | Manufacturer Web Site (French): https://fr.watts.ca | Warranty: https://productcatalog.sheret.com/DocServer/DSAnonDownloadServlet?action=download&type=product-artifacts&key=DS62b89106-4459-4a8d-a1cd-cb9eacbacb2c | Manufacturer Web Site: http://www.wattscanada.ca
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.