REED Internal Pipe Cutters cut from the inside diameter of the pipe for shower drains, sprinkler drops, closet flanges and waste drain lines. Heat-treated steel, saw tooth blades on the IC1S, IC1SL, and IC3/4SL internal pipe cutters make for fast cutting. The IC1A comes with an abrasive blade for areas where the blade may come in contact with concrete or other hard surfaces which would destroy a saw tooth blade. Available in a variety of sizes and styles, all internal pipe cutters fit in a standard 3/8" drill. During use, flats on the larger cutters keep the cutter from slipping in the jaws of the drill while a lock washer on the smaller cutters keeps the blades from slipping. All saw tooth internal pipe cutter models cut plastic pipe aggressively and can cut wood for sink lugs. IC1SL and IC3/4SL feature an exclusive, adjustable guide that doubles as a depth gauge. The IC3/4SL model is an exclusive size with its 3/4" pipe diameter.
Heat-treated steel, saw-toothed blades make for fast cutting. | Exclusive, adjustable guide on IC1SL and IC3/4SL doubles as a depth gauge. | Used to cut off pipes below floor level or in the ceiling in new construction, around pools, and for replacement of closet flanges. | Conveniently cut from the inside using a standard 3/8" drill. (Drill not included.)
Manufacturer Web Site: https://www.reedmfgco.com/en/ | Parts Breakdown: https://productcatalog.sheret.com/DocServer/DSAnonDownloadServlet?action=download&type=product-artifacts&key=DSbc0f9ce4-8643-4dc6-83a5-a481b5634ba3 | Installation Manual: https://productcatalog.sheret.com/DocServer/DSAnonDownloadServlet?action=download&type=product-artifacts&key=DS567084b5-03fa-45b2-93dc-c822e69faa3a | Manufacturer Web Site: http://reedmfgco.com
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.