Reduce the amount of pressure from the water source and filter out particulates that can clog and damage emitters with the all-in-one pressure-regulating Y filter. This device is preset at 30 PSI and has a flow range from 0.2 to 5 GPM. The 200-mesh filter blocks particles and is removable for cleaning. The 3/4 in. MPT X 3/4 in. MPT device connects to pipe commonly used in underground valve systems. The pressure-regulating Y filter is made of ABS; filter screen is made of stainless steel.
Drip irrigation waters plants efficiently, reducing water usage by up to 70% compared to conventional sprinkler irrigation. Drip irrigation systems are easy to install, operate, and maintain, and can easily be automated. With proper installation of a drip system, water is delivered precisely to where plants need it most, and plants get the hydration they need for optimal growth and overall health.
NDS is a leading manufacturer of drip and micro-irrigation solutions and the trusted brand of professional landscapers since 1972. The company offers a wide selection of water management solutions engineered for performance, durability, and ease of installation. For more information and technical support, visit the NDS Pro website.
Regulates water pressure from water source; preset at 30 PSI, ideal for most drip irrigation systems | Connects to a water supply line with a 3/4 in. FPT connection point | Comes with one pressure-regulating Y filter | Lowers incoming water pressure from a water source and filters out particulates for optimal performance of your drip system | Made of heavy-duty plastic treated with UV inhibitors | Filter can be flushed out by removing the flush cap and running water through; also can be removed from the middle housing to clean | Ideal for most drip irrigation systems to regulate water pressure from water source and filter out particulates in water | Drip irrigation systems work with low water pressure, and the pressure-regulating filter lowers the water pressure from a water source while preventing particulates from clogging and potentially damaging emitters | 200-mesh stainless steel filter screen blocks particles in the water from clogging emitters; filter is removable for cleaning and maintenance | Attach to 3/4 in. FPT; use Teflon tape to make a watertight seal and tighten by hand; flow rate for line should not exceed 5 GPM [emitter flow rate (GPH) multiplied by # of emitters on line divided by 60 should be less than 5 GPM]
Brochure: https://productcatalog.sheret.com/DocServer/DSAnonDownloadServlet?action=download&type=product-artifacts&key=DS0a9e18a6-fc96-4a6f-ae7d-7eec78a6e2ce | Manufacturer Web Site: http://www.ndspro.com
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.