4 PVC SEWER CAP
SKU: 7690532
Installed on the end of PVC white sewer pipe or spigot to permanently or temporarily cap a pipe or spigot end.
Injection molded in non-toxic durable white polyvinyl chloride (PVC) | High chemical resistance to nearly all acids, alkalis, alcohols, halogens, and other corrosive med ia | Maximum service temperature rated at (140F) +60C | Use approved PVC primer and solvent cement to make PVC Jo ints | Flame retardant, will not support combustion in the presence of an ignition source | Maximum Service Temperature Rated at (140F) +60C | Use approved PVC primer and solvent cement to make PVC Joints | Flame Retardant, will not support combustion in the presence of an ignition source | Hand tighten plus a half turn provides a complete seal | Injection molded in Non-Toxic durable White Polyvinyl Chloride (PVC). | High chemical resistance to nearly all acids, alkalis, alcohols, halogens, and other corrosive media | Teflon tape is recommended for threaded joints | High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
Specification Sheet: https://productcatalog.sheret.com/DocServer/DSAnonDownloadServlet?action=download&type=product-artifacts&key=DS0140dabb-8a03-457e-898c-bd77ee7599c7 | Manufacturer Web Site: https://canplas.com/ | Manufacturer Web Site: http://www.canplas.com
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.