6X4 PVC SEWER BUSHING SPXH
SKU: 7690574
Installed in a PVC white piping system to provide an increase from a PVC sewer hub up to a spigot that can then be Installed in a hub spigot and hub are back to back so the fitting is extended.
Injection molded in non-toxic durable white polyvinyl chloride (PVC) | High chemical resistance to nearly all acids, alkalis, alcohols, halogens, and other corrosive med ia | Maximum service temperature rated at (140F) +60C | Use approved PVC primer and solvent cement to make PVC Jo ints | Flame retardant, will not support combustion in the presence of an ignition source | Maximum Service Temperature Rated at (140F) +60C | Use approved PVC primer and solvent cement to make PVC Joints | Flame Retardant, will not support combustion in the presence of an ignition source | Hand tighten plus a half turn provides a complete seal | Injection molded in Non-Toxic durable White Polyvinyl Chloride (PVC). | High chemical resistance to nearly all acids, alkalis, alcohols, halogens, and other corrosive media | High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
Specification Sheet: https://productcatalog.sheret.com/DocServer/DSAnonDownloadServlet?action=download&type=product-artifacts&key=DS3a76550a-8669-496c-942e-02e016e6296b | Manufacturer Web Site: https://canplas.com/ | Manufacturer Web Site: http://www.canplas.com
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.